unisonic technologies co., ltd mpsa92/93 pnp silicon transistor www.unisonic.com.tw 1 of 4 copyright ? 2012 unisonic technologies co., ltd qw-r201-019.c high voltage pnp transistor ? description the utc mpsa92/93 are high voltage pnp transistors, designed for telephone signal switching and for high voltage amplifier. ? features * high collector-emitter voltage: ? v ceo =-300v (utc mpsa92 ) ? v ceo =-200v (utc mpsa93 ) * collector dissipation: ? p c (max)=625mw ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 MPSA92L-AB3-R mpsa92g-ab3-r sot-89 b c e tape reel mpsa93l-ab3-r mpsa93g-ab3-r sot-89 b c e tape reel mpsa92l-t92-b mpsa92g-t92-b to-92 e b c tape box mpsa92l-t92-k mpsa92g-t92-k to-92 e b c bulk mpsa92l-t92-r mpsa92g-t92-r to-92 e b c tape reel mpsa93l-t92-b mpsa93g-t92-b to-92 e b c tape box mpsa93l-t92-k mpsa93g-t92-k to-92 e b c bulk mpsa93l-t92-r mpsa93g-t92-r to-92 e b c tape reel note: pin assignment: b: base c: collector e: emitter
mpsa92/93 pnp silicon transistor unisonic technologies co., ltd 2 of 4 www.unisonic.com.tw qw-r201-019.c ? absolute maximum rating (t a =25 unless otherwise specified) parameter symbol ratings unit collector-base voltage mpsa92 v cbo -300 v mpsa93 -200 v collector-emitter voltage mpsa92 v ceo -300 v mpsa93 -200 v emitter-base voltage v ebo -5 v collector current i c -500 ma collector dissipation sot-89 p c 1 w to-92 1.5 w junction temperature t j 150 storage temperature t stg -55~ +150 note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (t a =25 , unless otherwise specified) parameter symbol test conditions min typ max unit off characteristics collector-base breakdown voltage mpsa92 bv cbo i c =-100a, i e =0 -300 v mpsa93 -200 v collector-emitter breakdown voltage mpsa92 bv ceo i c =-1ma, i b =0 -300 v mpsa93 -200 v emitter-base breakdown voltage bv ebo i e =-100a, i c =0 -5 v collector cut-off current mpsa92 i cbo v cb =-200v, i e =0 -0.25 a mpsa93 -0.25 a emitter cut-off current i ebo v eb =-3v, i c =0 -0.10 a on characteristics dc current gain(note) h fe v ce =-10v, i c =-1ma v ce =-10v, i c =-10ma v ce =-10v, i c =-30ma 60 80 80 collector-emitter satu ration voltage v ce ( sat ) i c =-20ma, i b =-2ma -0.5 v base-emitter satura tion voltage v be ( sat ) i c =-20ma, i b =-2ma -0.90 v small signal characteristics current gain bandwidth product f t v ce =-20v, i c =-10ma, f=100mhz 50 mhz output capacitance mpsa92 c ob v cb =-20v, i e =0, f=1mhz 6 pf mpsa93 8 pf note: pulse test: p w < 300s, duty cycle < 2%, v ce ( sat ) < 200mv
mpsa92/93 pnp silicon transistor unisonic technologies co., ltd 3 of 4 www.unisonic.com.tw qw-r201-019.c ? typical characteristics dc current gain, h fe collector current, i c (ma) dc current gain collector current, i c (ma) saturation voltage collector-emitter saturation voltage, v ce(sat) (mv), base-emitter saturation voltage, v be(sat) (mv) v ce =-10v v ce(sat) v be(sat) i c =10i b -10 0 -10 1 -10 2 -10 3 -10 4 10 0 10 1 10 2 10 3 -10 1 -10 2 -10 3 -10 4 -10 0 -10 1 -10 2 -10 3 -10 4 collector-base voltage, bv cbo (v) c ib (pf), c cb (pf) capacitance c ib c cb collector-emitter voltage, b vceo (v) collector current, i c (ma) active-region safe operating area dc 1.0ms utc mpsa93 utc mpsa92 1 .5w t he r mal limitati o n t c =25 625mw thermal limitation t a =25 bonding breakdown limitation t j =25 10 1 10 2 -10 -1 -10 0 -10 1 -10 2 -10 1 -10 2 -10 3 -10 4 -10 0 -10 1 -10 2 -10 3 current gain bandwidth product current gain bandwidth product, f t (mhz) collector current, i c (ma) v ce =-20v f=100mhz 10 1 10 2 10 3 -10 0 -10 1 -10 2 0.1ms
mpsa92/93 pnp silicon transistor unisonic technologies co., ltd 4 of 4 www.unisonic.com.tw qw-r201-019.c utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
